Stove Shield
Best Seller
RBS330DRBB GE Stove Protector - Stove Shield
Premium stove top protector for RBS330DRBB
$79.99
In Stock
Free shipping on orders over $100
Sale
Buy 2, Get 1 Free
Get 3 Stove Shields for the price of 2
$239.97
$159.98
Save
$79.99
Key Features
Packaging
Ships Flat
Surface
Non-Stick, Easy Clean
Thickness
.5-.6mm (2x Thicker)
Heat Resistant
Up to 500°F
Product Warranty
365-Days
Fit
Custom
Fit
for RBS330DRBB
Accepted Payment Methods
Fitment
This will fit GE model RBS330DRBB!
This Stove Shield is cut to the RBS330DRBB stovetop molding. This protector can be used while cooking, will lay flay and each burner cutout is fitted based on the diameter of the raised areas around each burner.
Burner layout for RBS330DRBB, 4 burners, 30 Inch gas range.
- Your model label reads RBS330DRBB. It's usually located on a sticker on the inside door frame of the oven or warming drawer door frame under the oven, on the side of the frame, or if this is a built-in cooktop, on the bottom side of the cooktop. Here's how to find it.
- The stovetop has 4 burners and is about 30 Inch wide.
- It's a gas range with grates, not a flat glass-top electric cooktop.
Cut for a 4-burner layout. If your range has a different model number or layout, this template won't line up. Match the layout to your stovetop, or look up your model first.
Specifications
RBS330DRBB protector specs
| Fits brand | GE |
| Fits model | RBS330DRBB |
| Cooktop type | Gas range |
| Cooktop width | 30 Inch |
| Burner count | 4 |
| Pieces | 1 piece |
| Material | Fiberglass-based |
| Coating | Non-stick, easy to clean |
| Thickness | 0.5-0.6 mm |
| Heat resistance | Up to 500°F |
| In the box | 1 piece + installation guide |
| Warranty | 365-day warranty, 30-day returns |
Why this one
- Custom cutMade for exact model RBS330DRBB.
- About 2x thicker0.5-0.6mm thick, thicker than generic protectors.
- Wipe or rinse cleanEasy to clean, non-stick surface.
- Heat-safe to 500°FUse while cooking to catch spills and prevent messes.
- 365-day warrantyEvery Stove Shield comes with a 365-day warranty.
COMPARED
How our protector stacks up
Below is how Stove Shield stacks up against other generic protectors on the market. It’s easy to see why people choose our protectors over other generic options on the market.
| Stove Shieldfor RBS330DRBB | Generic ProtectorsDIY or thin alternatives | |
|---|---|---|
| Fit | Cut to the layout | Do it yourself or often not exact model |
| Burner openings | Aligned to fit around the raised areas of each burner | DIY or often improper fittings |
| Material | Fiberglass | Fiberglass |
| Thickness | .5-.6mm, approx. 2x thicker | Often less than .5mm |
| Heat rating | Up to 500°F | Up to 500 F |
| Packaging | Flat in the box | Often rolled, needs flattening |
| Warranty | 365-days | Often 30 days or less |
Competitor 'Generic Protector' details vary by brand and are subject to change at any time.
Installation
Fits in about 30 seconds
1
Clear the cooktop
Lift off the grates and make sure the surface is clean and dry.
2
Lay it down
Set the Stove Shield on the panel, lining the cutouts up with your burners.
3
Replace the grates
Put the grates back and cook. Keep the mat clear of direct flame.
Good to know
Questions and care
What is the best stove top protector, cover or liner for the GE RBS330DRBB?
One that's cut for your exact GE RBS330DRBB model. Generic mats never line up with the burners correctly. Our GE RBS330DRBB stove top protector is cut using the measurements of your specific GE gas range, so the 4 openings match the burner positions on the RBS330DRBB.
Is the GE RBS330DRBB stove cover safe to use with all 4 gas burners?
Yes. The GE RBS330DRBB stove top cover is heat-resistant to 500 degrees with clearance around each gas burner head. We've had customers using these daily for years.
How do I clean my GE RBS330DRBB stove liner?
Stove Shield is washable with warm water and soap. Your GE RBS330DRBB stove liner can be removed and washed over the sink, or wiped clean while still on the panel — as frequently as needed.
Although the GE RBS330DRBB stove cover is built to withstand the damage your panel would otherwise take, we recommend avoiding rough scrubbing on the shield, which can wear down the non-stick PTFE coating over time.